Spectrum Analyzer 1GHz with Tracking Generator
Product Categories: Digital Storage Oscilloscope, Digital Storage Oscilloscope, Electronics, Engineering Equipment
Product Page: https://www.labappara.com/product/spectrum-analyzer-1ghz-with-tracking-generator/
Product DescriptionSpectrum Analyzer 1GHz with Tracking Generator
Features :
- Frequency range 150kHz ~1050MHz (with Tracking Generator)
- 4.5 Digit display center & marker frequency, 0.1MHz resolution
- Amplitude range -100dBm ~ +13dBm
- Filters 20KHz, 250KHz & Video Filter
- AM/FM Demodulator included
- Full range built-in Tracking Generator 150kHz ~ 1050MHz
- Output Power 1dBm to ~ 50dBm (50ohms)
Technical Specifications:
- Frequency range : 150kHz to 1050MHz (-3dB)
- Frequency resolution : 100kHz, Display 4 digit
- Display accuracy center freq. : +100kHz
- Display accuracy marker : 0.1% Span +100kHz
- Frequency stability : <150kHz /hr (Drift)
- Frequency scan width : Zero scan 0Hz/div, and 100kHz in 1-2-5 seq.
- Frequency scan width accuracy : +10%
- IF bandwidth (-3dB) : Resolution 20kHz& 250kHz
- Video bandwidth VBW : 400kHz
- Sweep time (Fixed) : 23ms
- Amplitude
- Amplitude range : 100dBm to +13dBm
- Screen display range : 80dB (10dB/div)
- Reference level : -27dBm ~ +13dBm (in 10dB steps)
- Reference level accuracy : +2dB
- Average noise level : -103dBm (250kHz RBW)
- Frequency response : +2dB(Relative to 250MHz, ATTN 10dB)
- Spurious responses : <-75dBc (2 signals, -27dBm (3rd order)
- inter modulation each Freq. Distance >3MHz)
- Harmonic distortion : <-75 dBc (2nd, 3rd)
- Absolute amplitude accuracy : +2.5dB
Input
- Input impedance : 50ohms
- Input connector : BNC
- Input attenuator : 0 to 40 dB (4 x 10dB steps)
- Input attenuator accuracy :+2dB / 10dB steps
- Max input level : +10dBm, (0dB attenuation)
- : +20dBm (with 20dB attenuation)
- DC : +25V
Tracking Generator
- Output frequency range : 150kHz ~ 1050MHz
- Output power level : -50dBm , +1dBm (In 10dB steps & fine control)
- Output attenuator : 0 ~ 40 dB (4 x 10dB steps)
- Output attenuator accuracy :+1dB
- Output flatness : +1.5dB (150kHz ~ 1050kHz)
- spurious outputs
- Harmonic & non : <20dBc
- harmonic spurs
- Output Impedance : 50ohms (BNC female)
Miscellaneous
- AM/Demodulator : Ear phones, load impedance
- Included Ear Phones : >8ohms
- Load Impedance : >8ohms
General
- Display : CRT 6 inch, 8 x 10div internal Graticule
- Trace rotation : Adjustable on Front panel
- Line voltage : 220V +10%, 50 to 60 Hz
- Power consumption : Approx. 25W
- Power requirement : 220 VAC +10% , 50 Hz
- Weight : 7.0Kg Approx.
- Dimensions (mm) : 280 (L) x390(B) x 130(H)
Standard Accessories :
Power cable, Probe - 2Nos., Ear phone, Instruction manual
|