Flow Table

Product Categories: Pharmacutical Equipments

Product Page: https://www.labappara.com/product/flow-table/

Product Description

Flow Table - Laboratory Equipment

• Consists of a steel table top 76.2 cm (30 inch dia), finely machined
• Integral cast ribs are designed for support and strength
• Fabricated out of cast iron and is of study construction
• Holes for mounting in foundations are drilled in the base plate
• Ground and hardened steel cam is designed to lift and drop the table by 12.5 mm
• Hand wheel makes it simple to operate the table
• Supplied with one conical mould with handles, 12 cm. height having 17 cm. top internal diameter and 25 cm. I.D. at the base
• Complete with a tamping rod 16mm. dia x 600 mm long one end rounded
• Also Provide electrically operated/through a reduction gear operated
• Fitted with a motor to give approximately 100 rpm
• Suitable for operation in single phase 230 Volts, 50 Cycles, A.C. supply
• Flow table test or flow test, also known as the slump-flow test, is a method to determine consistency of fresh concrete.
• Flow table test is also used to identify transportable moisture limit of solid bulk cargoes.
• It is used primarily for assessing concrete that is too fluid (workable) to be measured using the slump test because the concrete will not retain its shape when the cone is removed.