Electronics

Showing 81–96 of 339 results

Digital KW Watt Meter 5A/415V,3E 3P/4 Wire (96X96)

Digital KW Watt Meter 5A/415V,3E 3P/4 Wire (96X96)

Digital KW Watt Meter 5A/415V,3E 3P/4 Wire (96X96) Parameter displayed: Active power consumption of three phases Features: – Microcontroller based meters with low VA burden – 4 digit 3 line seven segment display – CT primary range 1A to 50kA AC programmable – CT Secondary range 0.5A to 5A – AC programmable – PT primary … Continue reading “Digital KW Watt Meter 5A/415V,3E 3P/4 Wire (96X96)”





Digital Lab Trainer (With Breadboard)

Digital Lab Trainer (With Breadboard)

Digital Lab Trainer (With Breadboard) Features: Strong construction Rust proof Easy to install Specifications: 8-bit Analog to Digital converter trainer 8-bit multiplying Digital to Analog converter  Digital multiplexer (8 Bit) 1:8 line demultiplexer (digital) 4 line to 16 line decoder/ 1 to 16 Demultiplexer 16 line to 1 line multiplexer 4-bit binary full adder & … Continue reading “Digital Lab Trainer (With Breadboard)”





Digital Pid Controller With Microprocessor Trainer

Digital Pid Controller With Microprocessor Trainer

Digital Pid Controller With Microprocessor Trainer Specifications: Based on CPU operating at 2.5/5MHz  Battery backup provided for RAM area RS-232C for CRT Terminal through 8251 Baud rate selection through DIP switch from 110-19,200 baud USB Interface to connect kit to computer V-USB Terminal Software to operate kit from USB Port to execute all commands like … Continue reading “Digital Pid Controller With Microprocessor Trainer”





Digital PLC Trainer

Digital PLC Trainer

Digital PLC  Trainer Digital Electronics Basics PLC Fundamentals PLC Hardware & Architecture Source & Sink Concepts Wiring Different field Devices to PLC Introduction to PLC Programming software Creating new application, addressing Programming Languages Basic Programming Instructions Advance Instructions Upload / Download / Monitoring Forcing of I/Os Fault finding / troubleshooting & documentation Communication with SCADA software Hands … Continue reading “Digital PLC Trainer”





Digital Power Factor Meter 5A/250V 96X96

Digital Power Factor Meter 5A/250V 96X96

Digital Power Factor Meter 5A/250V 96X96 DESCRIPTION : It incorporates solid state circuitry with micro-controller to measure Power Factor of single phase and three phase system. FEATURES : • The Meter does not require external transducer, hence panel wiring is reduced. • Absence of current is indicated by “Err” • Negative sign indicates lagging P.F. … Continue reading “Digital Power Factor Meter 5A/250V 96X96”





Digital Power Factor Meter 5A/415V,3E 3P/4 Wire (96X96)

Digital Power Factor Meter 5A/415V,3E 3P/4 Wire (96X96)

Digital Power Factor Meter 5A/415V,3E 3P/4 Wire (96X96) DESCRIPTION : It incorporates solid state circuitry with micro-controller to measure Power Factor of single phase and three phase system. FEATURES : • The Meter does not require external transducer, hence panel wiring is reduced. • Absence of current is indicated by “Err” • Negative sign indicates … Continue reading “Digital Power Factor Meter 5A/415V,3E 3P/4 Wire (96X96)”





Diode Valve Characteristics Apparatus

Diode Valve Characteristics Apparatus

Diode Valve Characteristics Apparatus Features:  Instrument comprises of DC Regulated Power Supply 0-250VDC/30mA, Variable AC Power Supply 6.3 VAC/1Amp, two round meters for voltage & current measurement.





Discrete Component Trainer (PCS Model)

Discrete Component Trainer (PCS Model)

Discrete Component Trainer (PCS Model) Features: The board consists of the following built in parts : 1. 4V5-0-4V5 A.C. at 500 mA, Power Supply. 2. 0-5VA.C. at 50mA, Power Supply. 3. 0-70V D.C. at 50 mA, continuously variable Power Supply. 4. ± 12V D.C. at 250 mA, IC regulated and short circuit protected Power Supply. … Continue reading “Discrete Component Trainer (PCS Model)”





Discrete Component Trainer (Regular Model)

Discrete Component Trainer (Regular Model)

Discrete Component Trainer (Regular Model)  Features: The board consists of the following built in parts : 1. 4V5-0-4V5 A.C. at 500 mA, Power Supply. 2. 0-5VA.C. at 50mA, Power Supply. 3. 0-70V D.C. at 50 mA, continuously variable Power Supply. 4. ± 12V D.C. at 250 mA, IC regulated and short circuit protected Power Supply. … Continue reading “Discrete Component Trainer (Regular Model)”





Display Interface

Display Interface

Display Interface Specification: 6 No of Seven Segment     Matrix Key Interface: 18 No of snap on keys     Simultaneous Keyboard and Display operation.     3 input mode such as scanned keyboard mode, scanned sensor mode and strobed input entry mode     6 character Display     8 character keyboard FIFO     Right or Left entry 6 … Continue reading “Display Interface”





DSO 100 MHz Sampling Rate 1GS/s (Color LCD Display)

DSO 100 MHz Sampling Rate 1GS/s (Color LCD Display)

DSO 100 MHz Sampling Rate 1GS/s (Color LCD Display) Features:  •100MHz bandwidth  •1GSa/s Real time sample rate •Large (7.0-inch) olor display, WVGA(800×480)  •Record length up to 1M  •Trigger mode: edge/pulse width/line selectable video/slop/overtime etc.  •USB host and device connectivity, standard  •Multiple automatic measurements  •Four math functions, including FFTs standard  Specifications:  ••Bandwidth:100MHz  •Channel:2  •Real-Time Sample Rate:1GSa/s … Continue reading “DSO 100 MHz Sampling Rate 1GS/s (Color LCD Display)”





DSO 200 MHz Sampling Rate 1 GS/s (Color LCD Display)

DSO 200 MHz Sampling Rate 1 GS/s (Color LCD Display)

DSO 200 MHz Sampling Rate 1 GS/s (Color LCD Display) Features: Easy to operate and maintain Extremely efficient Good operating speed Low maintenance Highlights 500MSa/s & 1GSa/s Sampling Rate 25 MHz Bandwidth 2 Channels, 2 Trace 5.7 in LCD Color Display USB Host/Device: Support USB Printer and USB Flash Drive Pict Bridge Function Easy scope … Continue reading “DSO 200 MHz Sampling Rate 1 GS/s (Color LCD Display)”





DSO 25 MHz Sampling Rate 250 MS/s (Color LCD Display)

DSO 25 MHz Sampling Rate 250 MS/s (Color LCD Display)

DSO 25 MHz Sampling Rate 250 MS/s (Color LCD Display) Features: Easy to operate and maintain Extremely efficient Good operating speed Low maintenance Highlights 500MSa/s & 1GSa/s Sampling Rate 25 MHz Bandwidth 2 Channels, 2 Trace 5.7 in LCD Color Display USB Host/Device: Support USB Printer and USB Flash Drive Pict Bridge Function Easy scope … Continue reading “DSO 25 MHz Sampling Rate 250 MS/s (Color LCD Display)”





DSO 60 MHz Sampling Rate 500 MS/s (Color LCD Display)

DSO 60 MHz Sampling Rate 500 MS/s (Color LCD Display)

DSO 60 MHz Sampling Rate 500 MS/s (Color LCD Display) Application: 1. Electronic circuit debugging 2. Circuit testing 3. Design and manufacture 4. Education and training 5. Automobile maintenance and testing Main Features: Autoscale function FFT function 25MHz100MHz Bandwidth Up to 500MS/s real time sample rate Max.6000 record length for each channel Dual channels plus … Continue reading “DSO 60 MHz Sampling Rate 500 MS/s (Color LCD Display)”





Dual DAC Interface

Dual DAC Interface

Dual DAC Interface Dual DAC interface consists of two 8-bit D/A converters whose current outputs are converted to voltage outputs using operational amplifiers. These Voltages (Ports outputs) are available. The inputs to the DACs can be controlled through I/O ports. A sample program is provided with the interface to generate a triangular/ square waveform. we can … Continue reading “Dual DAC Interface”





DUAL OUTPUT 30-0-30 V DC /1 Amps

DUAL OUTPUT 30-0-30 V DC /1 Amps

DUAL OUTPUT 30-0-30 V DC /1 Amps Dual Output DC Regulated Power Supply are constant Voltage & Constant Current type supplies , have high regulation for Load & Line Voltage variation . The supply can be use in independent & tracking mode . The supply are protected against short circuit & over load . The … Continue reading “DUAL OUTPUT 30-0-30 V DC /1 Amps”