Characteristics And Application
Showing 1–16 of 32 results
Conversion Of Galvanometer Into Ammeter
Conversion Of Galvanometer Into Ammeter Features : Instrument comprises of DC Regulated Power Supply 0-5VDC/150mA, two round meters (One milliammeter & One Galvanometer), Three set of Shunts resistance mounted behind the panel, connections of supplies, Meters & Shunts brought out at 4mm Sockets.
Diac Characteristic Apparatus
Diac Characteristic Apparatus Features : Instrument comprises of DC Regulated Power Supply 0-50 VDC/150mA, two round meters for voltage & current measurement, one Diac mounted behind the panel, connections of Supplies & Diac brought out at 4mm Sockets.
Energy Band Gap Apparatus
Energy Band Gap Apparatus Features : Power Supply : 0-10 Volts Voltmeter : Round Magnetic Coil Type 0-10 Volt Ammeter : Round Magnetic Coil type 100 uA Thermometer : 0-360 Degree
Energy Band Gap By Four Probe Method
Energy Band Gap By Four Probe Method Experiment consists of the following : Probes Arrangement : It has four individually spring loaded, coated with Zn at the tips. The probes are collinear and equally spaced. The Zn coating & individual spring ensure good electrical contacts with the sample. The probes are mounted in a bush … Continue reading “Energy Band Gap By Four Probe Method”
FET Characteristics Apparatus
FET Characteristics Apparatus Features: Two moving coil voltmeters MO 65 mounted on the front panel to measure voltage. The connections for each meter is brought out at 4mm sockets One moving coil ammeters MO 65 mounted on the front panel to measure Drain Current. The connections for each meter is brought out at 4mm sockets … Continue reading “FET Characteristics Apparatus”
Flashing & Quenching Of Neon Bulb
Flashing & Quenching Of Neon Bulb Features : Instrument comprises of High Voltage DC Power Supply 0-250 VDC/30mA, 3 Capacitors (Paper Type) connected behind the front panel, can beselected using toggle switches & one Neon Lamp.
H’ Parameter Of PNP Transistor In Common Emitter Mode Apparatus
H’ Parameter Of PNP Transistor In Common Emitter Mode Apparatus Features : Instrument comprises of Two DC Regulated Power Supplies 0-10VDC/150mA, 0-1VDC/150mA, Four round meters, One PNP Transistor mounted behind the panel, connections of Supplies, Meters & Transistor brought out at 4mm Sockets.
Half Wave, Full Wave & Bridge Rectifier Apparatus
Half Wave, Full Wave & Bridge Rectifier Apparatus Technical Specifications : Inbuilt variable AC power supplies Output Voltage : 9-0-9 VAC On Board Analog Moving Coil Meters Voltmeter : 0-20 VDC Ammeter : 0-250mADC Components provided Diode : 4 Nos. Filter : 2 Nos. Load Resistances : 50 ohm to 500 ohm . Circuit diagram … Continue reading “Half Wave, Full Wave & Bridge Rectifier Apparatus”
LCR Impedance Apparatus
LCR Impedance Apparatus Features : Instrument comprises of variable AC Power Supply 0-15 VAC, 2 AC moving coil meters to measure voltage & current, 2 Resistance, 2 Capacitors & 1 Inductance connected inside & connections brought out at terminals
LCR resonance Apparatus
LCR resonance Apparatus Features : Instrument comprises of 3 Resistances, 3 Capacitors & 1 Inductance connected inside & connections brought out at Sockets. 2 AC moving coil meters to measure voltage & current.
LED Characteristics Apparatus
LED Characteristics Apparatus Features : Instrument comprises of DC Regulated Power Supply 0-3 VDC/150mA, two round meters for voltage & current measurement, LED mounted on the panel, connections of Supplies & LED brought out at 4mm Sockets.
Measurement Of Peak, Average & RMS Value Of AC Signal
Measurement Of Peak, Average & RMS Value Of AC Signal Features:- Measurement Of Peak, Average & RMS Value Of a AC Signal comprises of Sine Wave Output on sockets, Step Down transformer, Circuit Diagram for Peak & Average Value measurement Printed and connections of important points brought out at Sockets/Terminals.
Microphone & Loudspeaker Characteristics Appratus
Microphone & Loudspeaker Characteristics Appratus Power supply of 9V, dB meter, Loudspeaker & microphone.
Mosfet Characteristics Apparatus
Mosfet Characteristics Apparatus Features : Instrument comprises of Two DC Regulated Power Supplies 0-5 V DC/150mA & 0-25V DC/150 mA, three round meters for voltage & current measurement, one MOSFET IRF 840 mounted behind the panel, connections of Supplies, Meters & MOSFET brought out at 4mm Sockets.
OPTO Electronic Devices Characteristics (LED,LDR, Photo Transistor & Photo Diode)
OPTO Electronic Devices Characteristics (LED,LDR, Photo Transistor & Photo Diode) Features: The board consists of the following built-in parts: 01. Two 0-10v d. C. At 100ma, continuously variable regulated power supplies. 02. D. C. Milliammeter, 65mm rectangular dial to read 0-10ma. 03. D. C microammeter, 65mm rectangular dial, with switch selectable ranges of 50ma, 500ma, … Continue reading “OPTO Electronic Devices Characteristics (LED,LDR, Photo Transistor & Photo Diode)”
Photo Diode Characteristics Apparatus
Photo Diode Characteristics Apparatus Features : Instrument comprises of DC Regulated Power Supply 0-3 VDC/150 mA, two round meters for voltage & current measurements, Photo Transistor mounted in a metal box connections of Supplies & Photo Transistor brought out at 4mm Sockets. Lamp holder with 100 W& 50 cm wooden plank are given with this … Continue reading “Photo Diode Characteristics Apparatus”